Have you ever thought about cutting the grass with an Echo Lawn Trimmer? This is actually a rather common garden tool used by many gardeners for getting rid of unwanted undergrowth and grass clippings. However, using this tool incorrectly can be harmful and cause more harm than good. In order to do so, you need to know exactly how to use it correctly. That way, you will not cause yourself any harm. Here are some things that you need to know:
Use of Echo Lawn Trimmer – Here’s one thing that many people do wrong when using their lawn trimmers: they cut too low or they cut the grass too short. Both of these are bad habits and can cause more damage instead of less. That’s why it’s important to get your grass cut at a high height so that it won’t stay below the level of the ground. Using an edger of the correct depth will also prevent you from cutting through the grass while it is growing.
Go slowly – The trimmer is an electric tool, so it’s not going to run as quickly as you want it to. That means you need to go gradually. That means you should start off cutting about a half inch or so from the middle of the lawn and work your way out. Every time you cut more grass, move a little bit closer to the edge so that you cut more grass at a time. It’s better to make small cuts instead of a long continuous one, as you don’t need to get the grass cut down to the ground level. This way, it won’t take so long to grow back.
Clipping Stops are a Mistake to Avoid – Even though you want to keep your trimmer blade as clean as possible, you still shouldn’t cut it all the way down to the ground level. If you do, you’ll only be hurting your grass and possibly killing it. To start, try and flip your clippings every couple of months to keep any of the dirt off the blades. If you do, stop right away and dig up all the grass clippings. Then, you can start clipping. Don’t do both at once.
Too Many Cut Scales – When you clip, you should always make sure to get a nice even amount of cut on each scale. Otherwise, it will look uneven. This happens because sometimes when you’re cutting the grass, you may cut more on one side than on the other. When you flip your trimmer back over, you’ll see the grass on one side that looks uneven because you cut too much on one side. If you don’t have an idea of how much to cut, it’s best to just flip the blade over until you get the amount you need.
Chopping the Grass by the Edge – Don’t ever cut the grass when it’s completely growing. This is where most people go wrong and cut too far down. This can actually cause your grass to grow in crooked shapes and patches. If you want your trimmer to cut in just the right places, go ahead and leave the grass alone. Wait for it to grow until you need to cut it.
Too Many Dampers – When you’re cutting your clippings, make sure not to apply too much water or fertilizer. This can cause the clippings to become mushy and lumpy. You want your cutting to be as close to the target edge as possible so that it looks straight. When wet, damp clippings stick to each other and grow longer than they would if you were to cut them straight. This makes cutting your grass look very messy.
There are a lot of good options available in the Echo lawn trimmers range. They can handle every job you throw at them from cutting lawns to trimming hedges to even making fake snow. They will keep your lawn looking great and give you more time to do whatever you want to. Best of all, these are very affordable and easy to use for any home.